Nail Salon Source Capture
The HealthyAir® Source Capture System extracts harmful chemical vapors and microscopic particles that are commonly present in nail products and generated by nail services.
By positioning the exhaust inlet (i.e. the hood of the extraction arm or Source Capture “Pop-Up” Vent) in close proximity to the work area, contaminated air is removed from the breath zone, resulting in a safer environment for nail technicians and clients.
- 78 cfm of air extraction per inlet for each nail station (total 156 cfm)
- Enables direct location of extraction arm inlet at the point of chemical application
- Portability allows for relocation of unit to service various nail stations as needed
Added benefits of system use include:
- Conserves energy by reintroducing purified air back into the facility, rather than exhausting is outside, which in turn requires additional heating/cooling of makeup air
With patented eHEAP® technology, this unit effectively cleans air in a highly efficient and innovative 3-stage process, resulting in a safer work environment with a healthy breathe zone for occupants.
As contaminated air passes through the unit, the Pre-Filter, eHEPA® Filter, and Enhanced Carbon Catalytic Filter work in conjunction to capture microscopic air borne particles and kill microorganisms; including dust, smoke, allergens, virus, bacteria, mold, gasses, odors, and VOCs.
Recommend Nail Salon Use
(1) HealthyAir® Source Capture Dual Inlet system is capable of serving (2) adjacent nail stations.
The HealthyAir® Source Capture System is the ideal system for use in a multitude of commercial settings, including beauty salons, dental offices, prosthetic labs, auto shops, work stations, and more.
The HealthyAir® Source Capture Recirculating Ventilation System is designed to take in contaminated air, filter contaminants, and discharge purified air from the exhaust vent located on the bottom of the unit.
Weight, Dimensions & Installation
The approximate weight and base dimensions of the unit is: 45 lbs. - 12”l x 14”w x 21”h
The standard extraction arm hose length is 45”. Custom length hose is available, for information and pricing please contact us.
This portable floor unit is designed to be positioned in close proximity to the work station, however in some cases remote location of units is required. For customized layouts, please contact us for engineering and design recommendations.
By easily adjusting the flexible hose, the hoods of the extraction arms can be strategically positioned to capture impure air.
The unit may also be integrated with the Source Capture “Pop-Up” Vent, which is installed in the table to provide a fixed exhaust inlet that may be deployed when required and hidden when not in use: https://healthyair.com/collections/source-capture-vents/Source-Capture-Vent---Single-Inlet
The HA-SCP-G3 offers simple remote-control operation and is equipped with a three-speed fan that enables control of air flow and sound level.
Maintenance of the unit is simple and does not require the use of any tools.
The recommend filter replacement cycle is 6 months on average. However, the need for filter replacement naturally varies depending on the frequency and nature of use.
The following replacement filter is compatible with this unit: