The Healthy Air® Source Capture System for Dental Aerosol Extraction effectively collects airborne contaminants that are often present in dental offices; such as oral aerosols, ultra-fine particles, VOCs, disinfectant odors, mercury vapor, drill aerosols and abrasion powder.
By extracting airborne aerosols, ultra-fine particles, and vapors directly from the breathing zone, Healthy Air® technology provides an added layer of safety by improving air quality in the immediate vicinity of interaction between individuals. This “source capture” feature helps protect doctors, dental technicians and patients alike.
The Healthy Air® Source Capture System for Dental Aerosol Extraction Extended Inlet unit may only be operated as a Recirculating Ventilation System.
Patented eHEPA® Technology
With patented eHEPA® technology, this unit effectively filter air in a highly efficient and innovative 3-stage process, resulting in a safer work environment with a healthier breathing zone for occupants.
As contaminated air passes through the unit, the Pre-Filter, eHEPA® Filter, and Enhanced Carbon Catalytic Filter work in conjunction to collect and deactivate airborne particles; including dust, smoke, allergens, gasses, odors, and VOCs.
HealthyAir® System 3-stage process collectively utilizes the 5 filtration methods of Sieving, Direct impact, Inertial Impaction, Diffusion, and Electrostatic.
The Healthy Air® Source Capture System for Dental Aerosol Extraction only operates as a Recirculating System.
Recirculating Ventilation means the unit is designed to take in contaminated air though the extraction hose, filter contaminants, and discharge purified air from the exhaust vent, located on the bottom of the unit, back into the facility.
Weight, Dimensions & Installation
The approximate weight and base dimensions of the unit is: 48 lbs. - 15”l x 16”w x 21”h
The standard extraction arm hose length is 5’. Custom length hose is available, for information and pricing please contact us.
This portable floor unit is designed to be positioned in close proximity to the dental chair or workstation.
Initial setup of the unit is simple and requires installation of the extraction hose and caster wheels. The caster wheels enable the unit to be easily moved as needed.
By adjusting the flexible hose, the hood of the extraction arm can be strategically positioned approximately 6”-12” from the work area, to capture contaminates from the emission source.
The HA-SSC-G4-AE-S offers simple remote-control operation and is equipped with a three-speed fan that enables control of air flow and sound level (Low: 54 dBA, Medium: 56 dBA, High: 64 dBA)
Maintenance of the unit is simple and does not require the use of any tools.
Filter Model & Replacement
The Healthy Air® Source Capture System for Dental Aerosol Extraction utilizes the HA-SERIES-1213 filter set, consisting of a Pre-Filter, eHEPA Filter, and Activated Carbon Filter. Each unit comes with (1) per-installed filter.
The recommend filter replacement cycle is 9-12 months on average. However, the need for filter replacement naturally varies depending on the frequency and nature of use.
The following replacement filter is compatible with this unit: