The HealthyAir® Source Capture Fan-Filter Exhauster offers powerful source capture designed for outside ventilation application.
This unit has higher airflow rating, relative to other products in our source capture line, however it does not feature the patented eHEPA® filtration system.
This unit contains a high capacity bag filter, that is meant to protect the motor/fan component of the system as well as prevent debris from accumulating in the exhaust duct or from being discharged in the facility.
The components required to setup the unit for Outside Venting come with the unit, as outlined in the manual. When configured for Outside Ventilation, the system is designed to take in contaminated air though the extraction hose, filter contaminants, and discharge treated air out of the facility via an exhaust duct connection to the 4” dia. outlet port of the unit.
Weight, Dimensions & Installation
The approximate weight and base dimensions of the unit is: 40 lbs. - 12”l x 14”w x 21”h
The standard extraction arm hose length is 5'6”. Custom length hose is available, for information and pricing please contact us.
This floor unit is designed to be positioned in close proximity to the work station, however in some cases remote location of units is required. For customized layouts, please contact us for engineering and design recommendations.
By easily adjusting the flexible hose, the hoods of the extraction arms can be strategically positioned, approximately 6”-12” from the work area, to capture contaminates from the emission source.
The HA-SCE-G1 offers simple remote-control operation and is equipped with a three-speed fan that enables control of air flow and sound level.
Maintenance of the unit is simple and does not require the use of any tools.
Filter Model & Replacement
The HealthyAir® Source Capture Fan-Filter Exhauster utilizes the HA-PF7-1111 High-Capacity Pocket Filter. Each unit comes with (1) pre-installed filter.
The recommend filter replacement cycle is 12 months on average. However, the need for filter replacement naturally varies depending on the frequency and nature of use.
When the unit has been in operation for 400-hours, the Filter Change indicator light, on the Control Panel, will begin to flash. This serves as a reminder to inspect and/or replace the filter.
The Filter Change Timer can be reset by following the reset protocol outlined in the manual.
The following replacement filter is compatible with this unit: