Protect Your Breathing Zone with eHEPA® Source Capture®
The Healthy Air® Source Capture® Aerosol Extractor High Flow unit collects airborne contaminants generated during commercial processes to improve indoor air quality and reduce occupational hazard risk. Protect your breathing zone!
By extracting airborne aerosols, ultra-fine particles, and vapors directly from the breathing zone, Healthy Air® technology provides an added layer of safety by improving air quality in the immediate vicinity of interaction between individuals.
Patented eHEPA® Technology
With patented eHEPA® technology, this unit effectively filter air in a highly efficient and innovative 3-stage process, resulting in a safer work environment with a healthier breathing zone for occupants.
As contaminated air passes through the unit, the Pre-Filter, eHEPA® Filter, and Enhanced Carbon Catalytic Filter work in conjunction to collect and deactivate airborne particles; including dust, smoke, allergens, gasses, odors, and VOCs.
HealthyAir® System 3-stage process collectively utilizes the 5 filtration methods of Sieving, Direct impact, Inertial Impaction, Diffusion, and Electrostatic.
The Healthy Air® Source Capture Aerosol Extractor default mode of operation is Recirculating Ventilation.
Recirculating Ventilation means the unit is designed to take in contaminated air though the extraction hose, filter contaminants, and discharge purified air from the exhaust vent, located on the bottom of the unit, back into the facility.
The Healthy Air® Source Capture Aerosol Extractor may be configured for Outside Ventilation with the additional of the Outside Ventilation Adapter.
When configured for Outside Ventilation, the system is designed to take in contaminated air though the extraction hose, filter contaminants, and discharge treated air out of the facility via an exhaust duct connection to the 4” dia. outlet port of the unit.
Weight, Dimensions & Installation
The approximate weight and base dimensions of the unit is: 48 lbs. - 15”l x 16”w x 21”h
The standard extraction arm hose length is 5’. Custom length hose is available, for information and pricing please contact us.
This portable floor unit is designed to be positioned in close proximity to the workstation.
Initial setup of the unit is simple and requires installation of the extraction hose and caster wheels. The caster wheels enable the unit to be easily moved as needed.
By adjusting the flexible hose, the hood of the extraction arm can be strategically positioned approximately 6”-12” from the work area, to capture contaminates from the emission source.
The HA-SSC-G4-AE offers simple remote-control operation and is equipped with a three-speed fan that enables control of air flow.
Maintenance of the unit is simple and does not require the use of any tools.
Filter Model & Replacement
The Healthy Air® Source Capture Aerosol Extractor utilizes the HA-SERIES-1213 filter set, consisting of a Pre-Filter, eHEPA Filter, and Activated Carbon Filter. Each unit comes with (1) per-installed filter.
The recommend filter replacement cycle is 9-12 months on average. However, the need for filter replacement naturally varies depending on the frequency and nature of use.
The following replacement filter is compatible with this unit: